Bravo Company Mfg.
![]()
FEATURES
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when
grabbing the vertical grip
-Mounted in reverse angle to increase control when grabbing handguard & vertical grip
-Flat sides give better yaw control to the shooter during firing & non-firing manipulations
-Aggressive texture & generous storage volume combined w/ modular design to allow improvements &
adaptation in the future
-Cross bolt designed to work w/ improvised tools
-Black
FEATURES
-Gunfighter Vertical Grip Short
-KeyMod
-Flat Dark Earth
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
-Quick Detachable KeyMod Version
-Black
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
- Fits Picatinny Rails
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Aggressive texture and storage volume combined with modular design allows for improvements and adaptation in the future.
-Included isa cross bolt designed to work with improvised tools to allow for easy adjustment or re-tightening, reversible clamps which allows users to set up fasteners to reside on either side
-Spring-loaded clamps makes installation and removal easier
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Black
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
Kit Includes:
-Extractor made to USGI specs (shot peened)
-Extractor pin
-BCM extractor spring (chrome silicon, heat treated & stress relieved, shot peened)
-3 USGI gas rings
-Crane Ind O-ring (Mil-Spec)
-Black extractor insert
Other Features: Extractor, extractor pin, extractor spring, usgi gas rings, o ring/extractor insert
FEATURES
-Light Mount Modular
-KeyMod
-For Surefire Scout
-Fully Ambidextrous
-Low profile and sleek design
-Durable Aluminum
-Can be mounted flush or offset to the right or left
-Matte Black Finish
Other Features: For use with surefire's scout light mounting interface
FEATURES
-Fits standard 1913 Picatinny rail interface
-Accepts standard QD push button sling swivels
-Non-rotational locking interface
-Requires two lugs & one 1913 slot to mount properly
-All steel construction
-Includes hex wrench
Other Features: Fits standard 1913 picatinny rails, accepts qd sling swivels (not included), non-rotational interface
FEATURES
-PNT Trigger Assembly
-AR-15
-Polished Nickel Teflon
-Trigger and Hammer are precision machined Mil-Spec AIS18620 per the USGI TDP
-Not to be confused with MIM commercial market parts
-Small Pin Trigger and Hammer Pins (.156"/.157")
-Three step heat treated and case hardened
-Hand polished with 300% friction reduction
-Teflon Coating
-Made in USA
Other Features: Polished sear, nickel finish for reduced creep and grittiness, teflon to reduce friction
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Black
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a round carbine type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits carbine length gas systems and mil-spec front sight base
FEATURES
-Pistol Grip
-Mod 3
-Foliage Green
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 3
-Flat Dark Earth
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Flat Dark Earth
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Black
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps
FEATURES:
Material: Polymer
Finish: Flat Dark Earth
Size: For Mil-Spec tube
Snag free Design
Modular VBOST (Vehicle Borne Operations Sling Tab)
Longer overall length to fit longer "MilSpec" diameter AR10/A5/Intermediate receiver extensions
Storage compartment located in the toe of the stock, accessible through butt pad
Built in rubber butt pad for secure shoulder placement
Other Features: Storage compartment located in the toe of the stock.More pronounced sopmod cheekweld.Built in rubber butt pad for secure shoulder placement.
FEATURES
-Pistol Grip
-Mod 1
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Flat Dark Earth
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Black
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES
-Pistol Grip
-Mod 0
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 0
-Black
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Low-profile for increased mobility & decreased "snag" factor
-Comatible w/ m-lok mounting system
-Fits standard push button, quick detach sling swivel
-8-position (360°), non-rotational locking interface
-All steel construction
FEATURES
-Ultra-slim & radiused surface to allows a "round" handguard feeling, from an Octagonal profile
-Aggressive non-slip or non-reflective surface
-Ventilated for cooling
-Can be installed in either direction
-Can be cut to any length, depending on users requirements
-Each kit contains five panel strips
-Flat Dark Earth
FEATURES
-9" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-7" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-Rail section is made of hard anodized aircraft aluminum alloy
-Made to the mil-standard 1913 picatinny arsenal specs
-Features a snag resistant design, while retaining Mil-standards
-M-Lok® compatible
-3"
FEATURES
-10" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-Fully ambidextrous
-Fits majority of popular 1" round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45° degree) rail positions
-Durable Aluminum construction
-Intently designed to be low-profile & snag-free
Other Features: Fits most 1" tactical lights
FEATURES
-Gunfighter Light Mount
-1"
-KeyMod Version
-Mod 0
-Black
-Fully Ambidextrous mounting; either the left or the right side of the rail system
-Fits majority of popular 1-inch round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45 degree) rail positions
-Strong Aluminum construction
-Intently designed to below-profile and snag-free
-Patent Pending anchoring system
-Minimal added weight, 1 oz
Other Features: Fits most 1" tactical lights