Magpul
![]()
FEATURES:
-One of the lightest 50-round drums available
Other Features: Fits most sr25/m110 pattern rifles
FEATURES:
-Compatible with standard mil-spec forged AR15/M16 receivers*
-Thin, anti-snag profile & textured surface still allows for traditional manipulation of the bolt catch while
maintaining unobstructed access to the trigger
-Attaches to the existing bolt catch paddle via one screw
-Machined from durable billet 6061-T6 aluminum
-Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw
per MIL-DTL-16232G
-Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included)
*NOT compatible with 7.62x51 (.308 Winchester) firearms as well as most AR15 billet or polymer lower & upper receivers due to their larger and/or non-standard dimensions (including the S&W Magpul Spec Series™ lowers)
FEATURES
-Lightweight Mil-spec aluminum
-One-handed adjustments
-Weight: 11 oz.
-Extends from 6.3"-10.3"
-FDE
FEATURES
-Lightweight Mil-spec aluminum
-One-handed adjustments
-Weight: 11 oz.
-Extends from 6.3"-10.3"
-Black
FEATURES
-Caliber: 9mm
-10-round capacity
-Polymer construction
FEATURES
-Caliber: 9mm
-10-round capacity
-Polymer construction
FEATURES
-Dedicated, purpose-designed magazine for rifles chambered in 300 Blackout
-Optimized internal geometry accommodates the wide variety of bullet profiles used in
300 Blackout cartridges
-Distinct rib design
-Carries forward the physical & performance features of the rest of the gen m3 line
FEATURES:
-Size 38*
-Chocolate
-Top grade bullhide leather exterior layer
-Supportive but flexible reinforced polymer interior
-Gun belt rigidity with dress belt comfort offers stretch & sag-free performance
-Removable chrome plated buckle with branded "tool-free" fasteners
-Standard 1-1/2" wide & 1/4" thick to fit most belt loops & holsters
-Eight holes with 3/4" spacing for a wide yet precise adjustment range
*Your pant size is not your belt size. See Sizing Guide under Specs at
https://www.magpul.com/products/tejas
Other Features: Made in texas, el original
FEATURES
-5 round
-Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal &
Magnum cartridges built on a 0.530" belted case head such as .300 Winchester, .257 Weatherby,
.264 Winchester, .270 Weatherby, 7mm Remington, .300 H&H, .338 Winchester, & others*
-Accepts a cartridge overall length of up to 3.50"
-Next-generation impact & crush resistant polymer construction
-Self-lubricating follower for increased reliability
-Long life stainless steel spring
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & is easy to disassemble for maintenance
*Note: NOT compatible with .404 Jeffery based cartridges & its derivatives such as the Remington Ultra Magnums (RUM/RSAUM) & Winchester Short Magnums (WSM/WSSM)
Other Features: Compatible with aics spec metal bottoms and the magpul bolt action magazine well for the remington hunter 700 long action magpul stocks for.300wm based family of catridges, for magnum long action
FEATURES
-For Glock 26
-12 round magazine capacity
-Added capacity and control with minimal footprint
-Built-in finger groove for full grip
-Features grasping grooves for easy retrieval
-Easily removable floor plate
-Made in USA
Other Features: Fits glock 26, gains two rounds of capacity while adding a textured finger groove for a full grip
FEATURES
-30 round capacity
-For 5.45x39mm rifles (AK74, MPi-AK-74N, PA md. 86, & others)
-Impact & crush resistant all polymer body
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-Long life stainless steel spring
-Ribbed gripping surface & aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with most pouches
*Magazine counts as 3 US compliance parts for 922r
Other Features: Fits ak-74 rifles, made in usa
FEATURES
-Mounts to rifle-length, mil-spec carbine, or A5-length receiver extension tubes (not included)
-Enhanced strength butt-plate withstands severe impact & recoil up to .50 BMG
-Rubber butt-pad provides positive shoulder purchase to prevent slippage & is adjustable for both
cant & height
-Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
-Steel adjustment shafts finished with Melonite® for wear & corrosion resistance
-All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
-Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails
for use with a monopod
-Sling Mounts
-Front/Rear -Rotation-limited QD sling swivel mounts (swivels not included)
-Rear -1.25" aluminum sling loop (left-right reversible)
*Specifications based on factory configuration
Other Features: For ar15 or ar10/sr25, installs on rifle length receiver extensions or mil-spec and a5 length carbine receiver extensions
FEATURES
-Mounts to rifle-length, mil-spec carbine, or A5-length receiver extension tubes (not included)
-Enhanced strength butt-plate withstands severe impact & recoil up to .50 BMG
-Rubber butt-pad provides positive shoulder purchase to prevent slippage & is adjustable for both
cant & height
-Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
-Steel adjustment shafts finished with Melonite® for wear & corrosion resistance
-All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
-Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails
for use with a monopod
-Sling Mounts
-Front/Rear -Rotation-limited QD sling swivel mounts (swivels not included)
-Rear -1.25" aluminum sling loop (left-right reversible)
*Specifications based on factory configuration
Other Features: For ar15 or ar10/sr25, installs on rifle length receiver extensions or mil-spec and a5 length carbine receiver extensions
FEATURES
-5 round
-Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal &
cartridges built on a 0.470" case head such as .30-06 Springfield, .25-06 Remington, .270 Winchester, .280 Remington, 8mm-06, & others*
-5-round capacity, but the follower leg can be easily clipped to increase the capacity by one extra cartridge
-Next-generation impact & crush resistant polymer construction
-Self-lubricating follower for increased reliability
-Long life stainless steel spring
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & is easy to disassemble for maintenance
*Note: Not recommended for use with short action cartridges such as the 7.62x51/.308 Winchester
Other Features: Compatible with aics spec metal bottoms and the magpul bolt action magazine well for the remington hunter 700 long action magpul stocks for 30.06 based family of catridges, for standard long action
FEATURES
-27 round
-Compatible with all 9mm double-stack Glock handguns
-Durable, lightweight, & extremely stiff polymer construction
-High visibility controlled-tilt follower
-Long life stainless steel spring for corrosion resistance
-Flared, easily removable floor plate
-Dot matrix panel for magazine marking & identification
-Magazine indicator windows on both sides of body at 10, 15, 20, & 27rounds remaining
-Drops free loaded or unloaded
Other Features: Compatible with all glock 9mm handguns.Extends below the grip
FEATURES
-21 round
-Compatible with all full-size, compact, and sub-compact 9mm double-stackGlock handguns
-Durable, lightweight, & extremely stiff polymer construction
-High visibility controlled-tilt follower
-Long life stainless steel spring for corrosion resistance
-Flared, easily removable floor plate
-Dot matrix panel for magazine marking & identification
-Magazine indicator windows on both sides of body at 10, 15,& 21 rounds remaining
-Drops free loaded or unloaded
Other Features: Compatible with all glock 9mm handguns.Extends below the grip
FEATURES
-20 round capacity
-For 7.62x39mm rifles (AK-47, AKM, AKS, SIG556R, & others)
-Impact & crush resistant all polymer body
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-Long life stainless steel spring
-Ribbed gripping surface & aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly
*Magazine counts as 3 US compliance parts for 922r
Other Features: Fits ak and akm rifles, made in usa
FEATURES
-10 round capacity
-For 7.62x39mm rifles (AK-47, AKM, AKS, SIG556R, & others)
-Impact & crush resistant all polymer body
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-Long life stainless steel spring
-Ribbed gripping surface & aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly
*Magazine counts as 3 US compliance parts for 922r
Other Features: Fits ak and akm rifles, made in usa
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via hand-removable, o-ringed rubber plugs that
are waterproof to 10 meters
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle leaf spring minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-S will only fit the common mil-spec tube.
Other Features: Fits mil-spec buffer tubes, moe sl with storage (s)
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.
Other Features: Fits mil-spec buffer tubes, compact buttstock
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.
Other Features: Fits mil-spec buffer tubes, compact buttstock
FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap with sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & side extension shields hand from hot barrel while allowing use of factory sling loop
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod
*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap with (or without) sling loop.
Due to the wide range of tolerances of your typical AK, minor fitting may be required. Not compatible with Yugo pattern rifles.
**Specifications based on factory configuration.
Other Features: Fits standard akm rifles with a front sling loop on the hand guard retainer.
FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & long side extensions shields hand from hot barrel while providing increased gripping surface
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod
*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap without sling loop. However, for those weapons with a retaining cap sling loop the MOE AK Hand Guard may be utilized if the loop is removed.
**Specifications based on factory configuration.
Other Features: Fits standard ak rifles without a front sling loop on the hand guard retainer.
FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & long side extensions shields hand from hot barrel while providing increased gripping surface
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod
*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap without sling loop. However, for those weapons with a retaining cap sling loop the MOE AK Hand Guard may be utilized if the loop is removed.
**Specifications based on factory configuration.
Other Features: Fits standard ak rifles without a front sling loop on the hand guard retainer.
FEATURES
-Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion*
-Minimum weight & bulk with reinforced polymer A-frame construction
-Cheek weld combines a slim profile with user comfort
-Optional snap on AK Cheek Risers are available for use with optics
-Internal storage compartment optimized for factory AK cleaning kit
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Rear -Optional Sling Mounts Kits (TYPE 1 and TYPE 2) accept push-button QD swivels
-Rear - 1.5" fixed sling loop
*Note: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AK's or the Norinco Type 56S/MAK-90 due to differences in the trunnion’s tang. Also not compatible with traditional milled receiver rifles.
FEATURES
-Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion*
-Minimum weight & bulk with reinforced polymer A-frame construction
-Cheek weld combines a slim profile with user comfort
-Optional snap on AK Cheek Risers are available for use with optics
-Internal storage compartment optimized for factory AK cleaning kit
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Rear -Optional Sling Mounts Kits (TYPE 1 and TYPE 2) accept push-button QD swivels
-Rear - 1.5" fixed sling loop
*Note: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AK's or the Norinco Type 56S/MAK-90 due to differences in the trunnion’s tang. Also not compatible with traditional milled receiver rifles.
FEATURES:
-Allows for the attachment of Harris-style stud mounted bipods to M-LOK compatible hand guards & forends
-Direct-connect allows the bipod to sit closer to the mounting surface
-Also compatible with other accessories that attach to traditional sling studs
-Machined from mil-spec anodized aluminum
-Features beveled ends & corners to reduce snagging & sharp edges
-All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards &
forends is included
FEATURES
-Lightweight, low-profile M-LOK slot index point for improved weapon control
-Forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Aggressive TSP Texture for enhanced weapon control
-Kit includes one M-LOK Hand Stop, one M-LOK Index Panel, & one M-LOK Rail Cover Type 2
-Also includes an M-LOK Hand Stop MOE Adapter for use with Magpul polymer M-LOK Hand Guards or
Forends, as well as other wider profile rails
Other Features: Fits m-lok rails
FEATURES:
-For use with M-LOK compatible hand guards & forends
-Accepts clip-style sling attachments such as our own Paraclip
-Durable steel construction
-Case hardened & finished with Melonite™ for extreme resistance to wear & corrosion
Other Features: Fits a wide range of clips
FEATURES:
-For use with M-LOK compatible hand guards & forends
-Accepts any push-button QD swivel as well as the Magpul QDM
-Machined from Mil-Spec anodized aluminum for durability & light weight
-Beveled edges reduce snagging
-Anti-rotation design prevents swivels from spinning
Other Features: Does not include qd swivel
FEATURES
-Includes 6 panels, each covering one M-LOK slot
-Low-profile, two-piece covers
-Install directly onto most M-LOK aluminum hand guards (non-polymer)
-Non-orientation specific - No up/down, left/right, front/back orientation
-TSP texture for additional grip
-Protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile
-Center locking tab is pre-scored to allow the user to snap off sections & mix & match colors for a
customized look
FEATURES
-9.5" long - Covers six full M-LOK slots
-Can be cut for customized length or to combine colors
-Compatible with all M-LOK systems
-Non orientation specific - no up/down, left/right, front/back orientation
-Low profile & lightweight
-Made of an extremely heat-resistant material
-Enhanced gripping surface
Other Features: Includes two covers