Grips

FEATURES
-Set of 2
-Black rubber
-Fits F & FS Models excluding versions Stock, Combat, Billenium, Compact, & Compact Type M
-Grip screws not included

FEATURES
-Attaches directly to M-LOK compatible hand guards & forends with no additional Picatinny rails required
-Made from high quality polymer
-Magpul TSP texture for positive control in all environments
-Optimized for use with the "thumb break method"
-Can be used as a traditional vertical foregrip
-All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards
& forends is included

FEATURES
-Replacement for AR15/M4 pistol-grip*
-More vertical grip angle than standard A2 grips
-Beavertail backstrap for enhanced ergonomics
-Slimmer thickness for a slightly smaller feel
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Drop-in upgrade for AK47/AK74 pistol grips*
-Fits both milled & stamped receivers, including those with grip reinforcement plates
-One-piece reinforced polymer construction
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: Due to the wide range of tolerances of AK receivers, some custom fitting of the grip may be necessary.

FEATURES
-Black
-Mounts flush to KeyMod slots
-Black anodized 6061-T6 aluminum
-Compatible with #4238 Mossberg Shotgun KeyMod Forend

FEATURES
-Hogue Grip
-For:Taurus
-For Models:PT-99, PT-92, PT-100and PT-101
-Panels
-Over Molded Rubber
-NoFinger Grooves
-Black

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Minimalist design provides for a compact & thin profile
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments

*Note: Will also fit most 7.62 NATO AR10/SR25 style of rifles.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.

FEATURES
-Black
-Injection molded Vertical Forward Grip
-Extremely durable & tough
-Slide rail mounts to Picatinny rails with cross bolt section

FEATURES:
-Easily adjustable, w/ the included hex key to the most popular angles (17, 25 & 33 degrees)
-Textured finger grooves & ribbed back-strap optimize comfort & provide positive control
-Black

FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards

FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards

FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"

FEATURES:
Fits: CZ Scorpion
Rugged polymer construction
Ergonomic design
TSP texturing for positve weapon control

FEATURES
-Dark Earth
-Injection molded Vertical Forward Grip
-Extremely durable & tough
-Slide rail mounts to Picatinny rails with cross bolt section

FEATURES:
-Easily adjustable, w/ the included hex key to the most popular angles (17, 25 & 33 degrees)
-Textured finger grooves & ribbed back-strap optimize comfort & provide positive control
-OD Green

FEATURES
-Flat Dark Earth
-Gunfighter Angled Grip
-Fits KeyMod Rails
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-Black
-Gunfighter Angled Fore Grip
-Fits KeyMod rails
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-Wolf Gray
-Gunfighter Angled Grip
-Fits Picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-Foliage green
-Gunfighter Angled Grip
-Fits Picatinny rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-Flat Dark Earth
-Gunfighter Angled Grip
-Fits picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

FEATURES
-OD Green
-Injection molded Vertical Forward Grip
-Extremely durable & tough
-Slide rail mounts to Picatinny rails with cross bolt section

FEATURES:
-Designed to plug the cavity on the bottom of a standard A2 grip
-Prevents debris from lodging in the cavity of the grip & functions as a shock absorbing pad to protect the
grip when setting the rifle down on hard surfaces