Tactical Rails And Accessories

Bcm vertical grip mod 3 black fits m-lok rails

FEATURES
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when
grabbing the vertical grip
-Mounted in reverse angle to increase control when grabbing handguard & vertical grip
-Flat sides give better yaw control to the shooter during firing & non-firing manipulations
-Aggressive texture & generous storage volume combined w/ modular design to allow improvements &
adaptation in the future
-Cross bolt designed to work w/ improvised tools
-Black

J&e handguard 15" quad rail mlok free float black
Other Features: Clamp on system,full picatinny rail on top,mlok slots on 3 sides,anti-rotation tabs, 21.50 oz,1.315" id,6061 aluminum

Lancer handguard sig mpx 6.5" m-lok carbon fiber

FEATURES:
-6.5" handguard
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-Lok attachment system for greater compatibility w/ aftermarket accessories

Lancer handguard sig mpx 10" m-lok carbon fiber

FEATURES:
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-LOK attachment system for greater compatibility w/ aftermarket accessories
-Same ease of installation as OEM handguard
-Extended versions clear most suppressors for improved ergonomics
-Weight: .25 lbs
-Length: 10"

Lancer handguard sig mcx 12" m-lok carbon fiber

FEATURES:
-M-Lok compatible slots at 12, 3, 6 & 9 O'clock, as well as bottom 45° faces
-Turn-key replacement for OEM handguard
-Around 40% lighter than OEM handguard
-1.8" ID allows for over-suppressor use
-1.5" top rail included

Ab arms picatinny rail polymer m-lok 7-slot
Other Features: Lightweight polymer,high heat resistance,includes m-lok t-nuts & 10 x 24 - 1/2" flathead screws,2.94" long

Ab arms picatinny rail polymer m-lok 5-slot
Other Features: Lightweight polymer,high heat resistance,includes m-lok t-nuts & 10 x 24 - 1/2" flathead screws,2.125" long

Ab arms picatinny rail polymer m-lok 4-slot
Other Features: Lightweight polymer,high heat resistance,includes m-lok t-nuts & 10 x 24 - 1/2" flathead screws,1.875" long

Ab arms pro aluminum free float handguard m-lok 15" blk
Other Features: 6061 t6 aluminum,hard coat anodized mil-aa8625 type iii class ii,1.5" overall width, 1.3" i.D.,integrated qd mount, 2" barrel nut anti rotation ears that are integral to mil-spec 1913 picatinny rail for clean fit w/forged or billet uppers,all hardware included

Utg rail picatinny ar-15 7" 2-pc drop-in carbine length

FEATURES
-7.28"L x 2.44"W x 2.44"H
-Top rail extends to upper receiver to form continuous mounting platform
-Clever top/bottom 2-piece design with integral spinal cords/alignment housing for perfect fit with
barrel nut & round front cap
-Made from aircraft aluminum with precision CNC machining & excellent anodizing/engraving
-Fits carbine length Model 4/15 & provides 4 Picatinny rails each with 14 slots
-Great zero-retention capability for all accessories installed on the rails
-Easy installation with no modification to the barrel
-Black rubber rail guards included
-Proudly made in the USA

Other Features: Two piece drop-in, made in usa

Yhm diamond series forearm for ar-15 rifle length

FEATURES
-Diamond Series Forearm (Rifle Length)
-Overall length: 12.58"
-Made of 6061-T6 aluminum
-Hardcoat anodized matte black to military specifications or better

Assemblies Include:
-One Jamb Nut
-One Barrel Nut
-Two Anti-Rotation Screws
-One Forearm Tube

Other Features: Ar-15 quad-rail, extended top rail for a gap-free fit, t marked rails, diamond shaped heat vents includes jam nut, barrel nut, to anti-rotation screws, and the forearm tube

Guntec ultra light handguard 7" m-lok black

FEATURES:
-T6 Aluminum
-Ultralight
-Proprietary Barrel Nut included
-M-LOK System
-Rail System Slides over barrel nut & is locked up against receiver w/ 6 screws
-Tight Fit up against receiver, which allows for a monolithic top rail
-7" Carbine Length

Other Features: Monolithic 1913 top rail

Mi handguard sp series 7" m-lok ar-15 suppressor comp.

FEATURES:
Inside diameter 1.75"
Outside diameter 2.0"
1.95" over mounting flats
High quality MIL-STD 1913 top rail
One five slot Magpul M-LOK polymer rail section included
Construction from 6061 aluminum, hard coat anodized
Barrel nut and barrel nut wrench included
Weight: 9 oz
Made in USA

Other Features: Suppressor compatible

Rise handguard slimline 15.0" picatinny black ar-15

FEATURES:
Length: 15"
Inside Diameter: 1.35"
Weight: 12.6 oz
Picatinny upper rail system
Integrated sling swivel mounting points
Precision CNC machined from 6061-T6 billet aluminum

Other Features: Designed for free-floating barrel, integrated sling swivel mounting points

Rise handguard slimline 13.5" picatinny black ar-15

FEATURES:
Length: 13.5"
Inside Diameter: 1.35"
Weight: 11.7 oz
Picatinny upper rail system
Integrated sling swivel mounting points
Precision CNC machined from 6061-T6 billet aluminum

Odin arca rail m-lok to arca 9" black

FEATURES:
Length: 9"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized

Odin arca rail m-lok to arca 4" black

FEATURES:
Length: 4"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized

Odin m-lok 5 slot accessory rail black aluminum

FEATURES
-M-LOK 5-Slot Accessory Rail
-2 5/16" long
-Allows you to mount sights, lights, & other tactical accessories to your free float M-LOK forend
-Can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec rail
-Made from 6061-T6 billet aluminum
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Includes M-LOK nuts, screws & hex wrench

Odin forend o2 lite mlok 9.5" black ar-15

FEATURES:
-9.5" M-LOK forend
-Free float
-Engineered w/ advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec
Rail.
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside

Other Features: Includes one 5 slot accy rail

Odin forend ragna m-lok 17.5" black ar-15

FEATURES:
-Free floating
-Features a one piece barrel nut w/ no shims or clocking needed.
-All mounting hardware included
-Length: 17.5"
-Weight: 11.1oz

Odin forend rune m-lok 15" black ar-15

FEATURES:
-Free floating
-All mounting hardware included & picatinny sight rail
-Length: 15.2"
-Weight: 6.55oz

Odin forend ragna m-lok 15.5" black ar-15

FEATURES:
-Free floating
-Features a one piece barrel nut w/ no shims or clocking needed.
-All mounting hardware included
-Length: 15.5"
-Weight: 10.35oz

Odin forend o2 lite mlok 15.5" black ar-15

FEATURES
-15.5" M-LOK O2 Lite Free Float Forend
-Made from 6005-T651 aluminum
-Hard anodized for durability
-Inside Diameter: 1.6"
-Outside Diameter: 1.8"W x 2.16"H
-The O2 lite is a full 20% lighter than its predecessors
-Engineered with advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6, & 9 o'clock positions & can be joined to create
continuous Pic Spec Rail
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside

Other Features: Includes one 5 slot accy rail

Odin forend mlok 15.5" black ar-15

FEATURES
-15.5" M-LOK Forend
-Free float
-Made from 6005-T651 aluminum
-Inside Diameter: 1.6"
-Outside Diameter: 1.8"W x 2.1"H
-Engineered with advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions & can be joined to create
continuous Pic Spec Rail
-QD sling mount positions at 3 & 9 o'clock
-Engineered to allow for low profile gas block to fit inside
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories

*All M-LOK forends include an M-LOK accessory rail (with KeyMod nuts), forend adapter, barrel nut,
Vibra-Tite, & 6 6-32 screws

Other Features: Includes one 5 slot accy rail

Odin forend rune m-lok 12" black ar-15

FEATURES:
-Free floating
-All mounting hardware included & picatinny sight rail
-Length: 12.4"
-Weight: 5.45oz

Odin forend ragna m-lok 12.5" black ar-15

FEATURES:
-Free floating
-Features a one piece barrel nut w/ no shims or clocking needed.
-All mounting hardware included
-Length: 12.5"
-Weight: 9.28oz

Odin forend o2 lite mlok 12.5" fde ar-15

FEATURES:
-Free float
-Aluminum
-Engineered w/ advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny Rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions
-QD sling mount positions at 3 & 9 o'clock
-Length: 12.5"
-Weight: 5.6oz.

Other Features: Includes one 5 slot accy rail

Odin forend o2 lite mlok 12.5" black ar-15

FEATURES
-12.5" M-LOK O2 Lite Free Float Forend
-Made from 6005-T651 aluminum
-Hard anodized for durability
-Inside Diameter: 1.6"
-Outside Diameter: 1.8"W x 2.16"H
-The O2 lite is a full 20% lighter than its predecessors
-Engineered with advanced ergonomics for comfort & improved performance
-Accessory rails can be placed at 3, 6, & 9 o'clock positions & can be joined to create
continuous Pic Spec Rail
-Four or more QD attachment points
-Made to fit Magpul QD
-Engineered to allow for low profile gas block to fit inside

Other Features: Includes one 5 slot accy rail

Odin arca rail m-lok to arca trax rail black

FEATURES:
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized

Odin handstop m-lok low profile black

FEATURES
-M-LOK B1 Handstop
-Designed to give you better control through a more ergonomic grip angle while not adding bulk to
the front of your rifle or pistol
-Low profile ergonomic fit
-Size: 2.38" x 1.15" x 0.90"
-Weight: 1.15 oz.

Guntec neoprene grip panel 3pk m-lok black

FEATURES:
-Aluminum Panels Coated in Neoprene Soft Rubber
-Slides into Unused M-Lok Slots
-Allows for Smooth/Non Slip Grip
-Extremely Thin Profile
-4" Length

Other Features: Slides into used m-lok slots extremely thin profile lightweight allows smooth non slip grip made in usa

Guntec rubber insert covers 10pk m-lok black

FEATURES:
-Neoprene Soft Rubber
-Slides into unused M-LOK slots
-Gen 2 Design has protruding grooves for better grip
-10 pieces/kit

Other Features: Slides into unused keymod slot guntec packing 10 per kit made in usa