Magazine Accessories

Pearce grip extension for glock 30

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F

Pearce grip extension for glock 29 & 30

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
-They form the next logical finger positioning feature to provide control & comfort without sacrificing concealablility

Pearce magazine extension plus for glock 26 27 33 39

FEATURES
-Grip extension for Glock 26/27/33/39
-Replaces the magazine base plate & internal floor plate
-Adds 2 rounds to the Glock 26 /1 round to the Glock 27 & 33 / 0 rounds to the Glock 39
-Adds 5/8" additional length
-Blends with the contours & texture of the handgun, giving a factory appearance
-Made from high impact polymer

Other Features: Increases 9mm by 2 rounds increases.40sw by 1 round

Pearce grip extension xl for glock 26 27 33 39

FEATURES
-Grip extension for Glock 26/27/33/39
-Replaces the magazine base plate
-Retains allother factory components
-Does not alter the capacity of the magazine
-Adds 1" additional length
-Blends with the contours & texture of the handgun, giving a factory appearance
-Made from high impact polymer

Other Features: Adds 1" additional length

Pearce grip extension for gen4 glock 26 27 33 39

FEATURES
-Grip extension for Glock 26/27/33/39 Gen 4
-Replaces the magazine base plate
-Retains allother factory components
-Does not alter the capacity of the magazine
-Adds 1" additional length
-Blends with the contours & texture of the handgun, giving a factory appearance
-Made from high impact polymer

Other Features: Adds 1" additional length, fits gen4 glock 26/27/33/39

Pearce grip extension for glock 26 27 33 39

FEATURES
-Grip extension for Glock 26/27/33/39
-Replaces the magazine base plate
-Retains allother factory components
-Does not alter the capacity of the magazine
-Adds 5/8" additional length
-Blends with the contours & texture of the handgun, giving a factory appearance
-Made from high impact polymer

Other Features: Adds 5/8" additional length

Pearce grip extension for glock gen 4 & 5 addtnl 1/2"

FEATURES:
-Replaces the magazine base plate on the GLOCK Gen 4 & 5
-Does not alter the capacity of the magazine
-Adds approximately 1/2" additional gripping surface as well as enhanced ergonomics
-The enhanced griping surface also incorporates a texture which closely matches the frame of the firearm

Other Features: This grip extension gives the user an additional 1/2" as well as included piece that can be installed to fill the semi-circular cut out in gen5

Pearce grip extension for glock mid & full size

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-An optional filler piece is provided for Glock models with a semi-circular cut-out in the lower front
area of the grip body (which allows for installation of the PG-19 on all Mid & Full Size Glocks
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F

Other Features: Not for use on non-full metal lined magazines

Pearce grip extension for keltec p11/taurus pt111

FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 1/2" of additional length
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F

Pearce plus magazine extension for glock 20/21/29/40/41

FEATURES
-Replaces the magazine floor plate adding two rounds capacity to Glock factory
M20, M21, M29, M40 & M41 magazines
-Used on high capacity magazines only, it will not work on the 10-round M20 & M21 magazines
-Not for use on Glock M30 10-round magazines
-Works on 3rd & 4th Generations
-Works on Glock M30 9-round magazines, enabling the magazine to hold 11 rounds
-Made from High Impact Polymer & withstand temperatures from -20F to 350F

Other Features: For use on high cap mags only adds 2 rounds to capacity, this product will work on 9 round glock 30 magazines, not for use on model 30 10-round magazines

Mag storage solutions pistol mag holder

FEATURES:
-Store & Organize Pistol Magazines & Ammunition
-Consumer Adjustable Dividers w/ 60 adjustment slots
-Ideal for most standard pistol magazines .22 thru .45 cal
-Magazine round count indicator windows are commonly visible
-Each Unit comes w/ 16 Magazine Dividers

Other Features: 16 adjustable dividers reinforced mounting holes magnet kit sold seperately

Mag storage solutions ar15 mag holder

FEATURES:
-Store & organize 20 & 30rd AR-15 magazines
-Magazines securely snap in/out
-Accepts magazines w/ ranger poor plates/dust protectors
-Holds 6 mags

Other Features: Holds up to 6 magazines reinforced mounting holes magnet kit sold seperately

Mag storage solutions ak/ar10 style mag holder

FEATURES:
-Store & organize AK-47, AR-10, FAL, SCAR 17s, CZ Scorpion magazines
-Magazines securely snap in/out
-Accepts magazines w/ ranger poor plates/dust protectors
-Holds 6 mags

Other Features: Holds up to 6 magazines reinforced mounting holes magnet kit sold seperately compatible with most 7.62x39 7.62x51 and.308 hi-cap mags

Ghost magazine extension kit glock 43 plus 2 rounds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds two rounds to factory magazines, uses existing magazine base plate.

Ghost magazine extension kit glock 42 plus 2 rounds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds two rounds to factory magazines, uses existing magazine base plate.

Ghost magazine extension kit glock 26/27 gen1-4 plus 3 rnds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds 3rds to 9mm &.40s&w, adds 2rds to.45gap, drop in for gens 1-4, maritime base plate.Fits glock 26, 27, 33, 39

Ghost magazine extension kit glock 19 gen 1-4 plus 3 rnds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds 3rds to 9mm &.40s&w, adds 2rds to.45gap, drop in for gens 1-4, maritime base plate.Fits glock 19, 23, 32, 38

Ghost magazine extension kit glock 17 gen 1-4 plus 3 rnds

FEATURES
-Pinky rest giving you full grip
-Stainless steel magazine spring
-Super duty design
-Uses existing magazine base plate

Other Features: Adds 3rds to 9mm &.40s&w, adds 2rds to.45gap, drop in for gens 1-4, maritime base plate.Fits glock 17, 17l, 18, 22, 31, 34, 35, and 37

Magpul pmag maglink fit 5.56 gen m2moe and gen m3 pmags

FEATURES
-Fits 5.56x45 PMAG 30 & 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
-Impact resistant polymer construction provides light weight & resists operational abuse
-Wide-set, two-piece bolt-on design resists flexing
-Integral grooves interface with PMAG ribbing to eliminate slippage

*Note: This MagLink is NOT compatible with first generation PMAGs (with Black follower, circa 2007-2009), 10 or 20 round PMAGs, custom branded PMAGs, or any other non AR15/M4 specific Magpul magazine such as the EMAG®, PMAG 30G, or PMAG 30 AUS. Will also not fit other larger caliber magazines such as 7.62x39 & 7.62x51 PMAGS or any metal magazine.

Other Features: Fits magpul pmag gen m2 moe and gen m3

Magpul pmag maglink ak/akm all 7.62x39 pmags

FEATURES
-Fits 7.62x39 PMAG 30-round AK/AKM MOE® and GEN M3™ magazines
-Impact resistant polymer construction provides light weight & resists operational abuse
-Wide-set, two-piece bolt-on design resists flexing
-Integral grooves interface with PMAG ribbing to eliminate slippage

*Note: This MagLink is NOT compatible with other Magpul magazines such as 5.56x45 and 7.62x51 PMAGS or any metal magazine.

Other Features: Fits pmag 30 ak/akm and pmag 30 ak/akm gen m3, 7.62x39 versions only

Magpul pmag ranger plate gen m3 5.56x45 black 3pk

FEATURES
-Floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines
-Incorporates an integral loop similar to the original Magpul USGI Ranger
-Provides unsurpassed speed & control during high stress, tactical magazine changes

Note: This Ranger Plate is a dedicated fit for 5.56x45 AR/M4 GEN M3 PMAGS. Will NOT fit PMAG GEN M2 MOE magazines, EMAG, PMAG 30G MagLevel, 7.62x39 PMAGS, 7.62x51 PMAGS, or any metal magazine.

Other Features: Fits magpul pmag gen m3 only

Magpul follower enhanced fits 5.56x45 usgi mags 3pk

FEATURES
-Drop-in replacement for the aluminum USGI 30-round magazine black or green follower
-4-way tilt design for increased feeding reliability
-Made from a non-hygroscopic & self-lubricating polymer

Note: Will not fit the latest generation USGI spring that is utilized with a tan follower.Also not optimized for thin-walled steel-bodied magazines.

Other Features: Fits most spec usgi aluminum magazines.Self-leveling design is a big improvement over the usgi follower.

Magpul original magpul 7.62x51 fde 3pk!

FEATURES
-3 pack
-For 7.62 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal

Other Features: Fits most ar-10 & sr25 magazines

Magpul original magpul 5.56x45 black 3pk

FEATURES
-3 pack
-For 5.56 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal

Other Features: Fits most ar-15 magazines

Lancer shotgun extension clamp no rail

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-No rails

Lancer shotgun extension clamp picatinny rail both sides

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on both sides

Lancer shotgun extension clamp picatinny rail one side

FEATURES
-Shotgun Extension Clamp for use with the LSX Shotgun Extension Tube
-The two aluminum clamping halves have high temperature silicone foam pads to ensure a
slip free connection with the carbon-fiber tube and shotgun barrel
-The clamping halves are held together with steel cap head screws
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-Also recommended for Remington applications due to the shallow threading on the
Remington magazine tubes
-Rail on one side

Lancer shotgun extension tube rem.870/1100/versamax plus8

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-8X adds eight rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 8 rounds, length 20.4" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer shotgun extension tube mossberg 590/930 plus8

FEATURES
-Adds 8 rounds to capacity
-Length: 18.3"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 8 rounds, length 18.3"

Lancer shotgun extension tube benelli m1/m2/sbe/sbe2 plus8

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-8X adds eight rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 8 rounds, length 20.5"

Lancer shotgun extension tube rem.870/1100/versamax plus7

FEATURES
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel
-The LSX-7X adds seven rounds to magazine's capacity

Other Features: Extra long spring included that needs cut to length, plus 7 rounds, length 17.7" some rem.Shotguns require minor modification of the shotguns magazine tube, two indents/tabs must be removed for proper operation

Lancer shotgun extension tube mossberg 590/930 plus7

FEATURES
-Adds 7 rounds to capacity
-Length: 17.7"
-Designed to attach to existing shotgun magazine tubes to provide added capacity to the shotgun
-Machined aluminum components combined with a lightweight carbon-fiber tube
-Creates a lightweight, durable extension to your shotgun
-An extra-long spring is included that can be cut to optimize loading
-Extension clamps are recommended for extension tubes that extend beyond the end of the barrel

Other Features: Extra long spring included that needs cut to length, plus 7 rounds, length 17.7"