Reloading Tools

Mec loader auto indexing grabber 20ga 078

FEATURES
-20 gauge
-7/8 oz. charge bar
-Bushings: 20, 22, 24
-Works on six shells at once
-Fully automatic primer feed
-Auto-cycle charging
-Three-stage crimp
-"Power Ring" resizer
-Automatic indexing
-Finished-shell ejection
-Auto-Dex™ automatically moves the shells through each reloading stage by
simply returning the handle to the top of its stroke

Other Features: 20 22 24 powder bushings 7/8 oz.Bar

Mec loader auto indexing grabber 12ga 118

FEATURES
-12 gauge
-1 1/8 oz. charge bar
-Bushings: 29, 30, 32
-Works on six shells at once
-Fully automatic primer feed
-Auto-cycle charging
-Three-stage crimp
-"Power Ring" resizer
-Automatic indexing
-Finished-shell ejection
-Auto-Dex™ automatically moves the shells through each reloading stage by
simply returning the handle to the top of its stroke

Other Features: 29 30 32 bushings 1 1/8 oz.Bar

Egw 5.56 ammo chamber checker 7-hole

FEATURES:
-Auto Ammo (Checks 5.56)
-7-hole
-Machined from solid aircraft grade aluminum using SAMI-spec Clymer reamers
-Anodized Matte Black

Other Features: Made in usa,

Rcbs shell holder #38

FEATURES
-Shell Holder #38
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs quick change powder measure w/large & small drums

FEATURES
-Allows reloaders to quickly convert from light pistol to magnum rifle charges
-Includes a drain attachment & small & large metering assemblies
-Quick Change parts can be used to upgrade existing Uniflow™ Powder Measures
-The hopper holds 1 pound of smokeless powder
-Metering assemblies change without the pull of a pin

Note: The Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge & for checking charges occasionally during the run

Rcbs fl die set.303 british gp-a

FEATURES
-Caliber: .303 British
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs shell holder #32

FEATURES
-Shell Holder #32
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Rcbs neck sizer die only 6.5 creedmoor

FEATURES
- Caliber: 6.5 Creedmoor
- The Neck Sizer Die features an Expander-Decapping Unit.
- It resizes the case neck only ( it doesn't touch the shoulder or body) and de-primes

Rcbs carbide roll crimp die set.45 long colt gp-b

FEATURES
-Caliber: .45 Long Colt
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs standard roll crimp die set.44-40 winchester gp-b

FEATURES
-Caliber: .44-40 Winchester
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base die set.243 winchester

FEATURES:
-For bottleneck cases used in tight-chambering semi-automatic, pump or lever-action rifles.
-The set consists of a Small Base Sizer Die w/ an Expander-Decapping Unit and REgular Seater Die w/ Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also de-primes the case
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets w/out crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth
-.243 Remington

Rcbs fl die set.221 fireball gp-a

FEATURES
-Caliber: .221 Fireball
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.338 win.Mag.Gp-a

FEATURES
-Caliber: .338 Winchester Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.223 wssm gp-a

FEATURES
-Caliber: .223 Winchester Super Short Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set 6mm creedmoor gp-d

FEATURES:
-Intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die w/ an Expander-Decapping
Unit, & a Seater Die w/ Bullet Seater Plug
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs group-c taper crimp die.350 legend

Rcbs fl die set.35 remington gp-a

FEATURES
-Caliber: .35 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Mec loader auto indexing grabber 28ga 034

FEATURES
-28 gauge
-3/4 oz. charge bar
-Bushings: 14, 16, 21
-Works on six shells at once
-Fully automatic primer feed
-Auto-cycle charging
-Three-stage crimp
-"Power Ring" resizer
-Automatic indexing
-Finished-shell ejection
-Auto-Dex™ automatically moves the shells through each reloading stage by
simply returning the handle to the top of its stroke

Other Features: 14 16 21 powder bushings 3/4 oz.Bar

Rcbs 3 die set w/roll crimp.444 marlin gp-c

FEATURES
-Caliber: .444 Marlin
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Rcbs small base sizer die only.308 winchester

FEATURES
- Caliber: .308 Winchester
- The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic,
pump or lever-action firearms.
- The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths.
- It also de-primes the case.
- Note: Not recommended for ammunition used in bolt-action rifles

Rcbs uniflow-iii powder measure
Other Features: The uniform-iii powder measure is the most accurate uniflow that rcbs has ever made.Throws consistently accurate charges reload after reload.

Mtm universal loading tray for metallic cartridges

FEATURES
-Holds up to 50 rounds for loading
-Holds:
-Almost all rifle cartridges .17 through .458 Winchester
-Handgun calibers for 9MM, .38 & .45 pistol caliber
-New rounds, such as the WSM, WSSM, Rem, Ultra Mags, & the 500 S&W Mag

Other Features: Accomodates all rifle and pistol cartridges

Rcbs model m500 reloading scale 505 grain capacity

FEATURES
-505-grain capacity
-Accurate to within 0.1 grain
-Right- or left-handed operation
-Two-poise design
-Magnetic dampening
-Leveling foot
-Ambidextrous metal scale pan
-Grain-to-gram conversion chart

Rcbs carbide taper crimp die set.45acp/.45 auto rim gp-b

FEATURES
-Caliber: .45ACP
-For straight-wall rifle & pistol cases
-The Carbide Sizer Die sizes the case & de-primes (the carbide sizer ring eliminates the need to lubricate).
-The Expander Die expands the case to the proper diameter to accept the bullet, & imparts case
mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Mec spindex kit 12ga.

FEATURES
-12 Gauge
-Low-cost replacement for the heads that become worn over time
-6 & 8 point crimp heads

Other Features: 6 & 8 crimp

Lyman ammo checker 7mm rem magnum aluminum

FEATURES
-For7MMRemingtonMagnum
-Check the quality and consistency of both reloaded rounds and purchased ammunition
-Allow a reloader to quickly confirm that their ammunition will fit in their chamber
-Machined from solid blocks of 6061 T6 aircraft grade aluminum
-Cut with custom tooling to SAAMI minimum chamber dimensions
-Bright orange anodizing makes them easy to find on your reloading bench

Lee shell plate #2 for auto breech lock pro

FEATURES:
-Works w/ cartridges: 45 ACP, 45 GAP, etc

Lee classic turrett press kit

FEATURES
-Fast and convenient
-Auto-Drum powder measure
-Powder Measure Riser
-Large and small safety prime
-4-hole turret
-Case conditioning tools: cutter, lock stud, chamfer tool, small and large primer pocket cleaner
and a bottle of case sizing lube
-Case length gauge
-Safety powder scale
-Modern Reloading second edition

Lee full length 2-die set.243 wssm

FEATURES
-Full length 2 die set for .243 Winchester Super Short Magnum
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee factory crimp die.260 remington

FEATURES
-Factory crimp die for .260 Remington
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Lee carbide 4-die set.38 special/.357 magnum

FEATURES
-For .38 Special
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee case conditioning kit

FEATURES
-Includes cutter & lock stud, chamfer tool & primer pocket cleaner