Reloading Tools

Rcbs fl die set.22 hornet gp-a

FEATURES
-Caliber: .22 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Lee factory crimp die only.204 ruger

FEATURES
-Factory crimp die for .204 Ruger
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Mec powder bushing #26

FEATURES
-View MEC's Powder Bushing Chart & Charge Bar Selection information:
https://www.mecshootingsports.com/Images/document/PowderBushingChart.pdf

Lee bullet feed kit 9mm-.365 dia.(.60"-.75")

FEATURES
-Automatically feeds bullets into the mouth of the bullet seating die
-For pistol calibers only
-Used with the Pro 1000 or Load-Master Presses
-Used for9mm to .365caliber bullets with lengths from .6" up to .75"long

Hornady a-tip seating stem 30 cal.308 176gr.

Rcbs primer pocket brush head large

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts

Lee loader.45acp

FEATURES
-Complete reloading system for.45 ACP
-Does not include rubber mallet

Lee collet 2-die set.222 remington

FEATURES
-For .222 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Lee full length 2-die set.25wssm

FEATURES
-Lee Pacesetter 2-Die Set
-25 Winchester Super Short Magnum (WSSM)
-Steel material
-Includes: Sizer Die and Bullet Seater Die with built in Roll Crimp
-Threads: 7/8"-14
-Accessories: Shellholder, Powder Dipper, Load Data Sheet, Plastic Container
-Adjustable crimp
-Built to last a lifetime and are great at producing factory like ammunition.

Mec charge bar 502-034

FEATURES:
-502-034
-Aluminum
-Drops 3/4 oz of lead shot
-Equipped with a soft insert to help eliminate shearing
-For Progressive MEC loaders

Other Features: For progressive reloaders equipped with a soft insert

Lee full length 3-die set 7.65 argentine mauser

FEATURES
-Pacesetter 3 die set for 7.65 Argentine Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.480 ruger

FEATURES
-For .480 Ruger
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee collet style crimp die only.30m1 carbine/.32-20win

FEATURES:
-Caliber: 30 Carbine
-Factory Crimp
-Threads: 7/8" - 14

Rcbs ar series die set w/taper crimp seater.300aac blackout

FEATURES
- Caliber: .300AAC Blackout
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Lee a-p shellholder #5

FEATURES
-#5 priming tool shell holder
-ForWSM's, 7mm Remington Mag, .303 British, .480 Ruger& similar

Frankford arsenal platinum brass dryer

FEATURES
-Specifically designed to dry brass after Rotary Tumbling or Ultrasonic cleaning
-Vented trays provide the best airflow to minimize drying time
-Top-mounted fan circulates up to 160°F air to quickly dry the brass inside & out
-5 removable trays easily dry up to 1,000 pieces of .223 brass in less than 1 hour
-Heavy Duty 500 watt unit

Other Features: Dries brass after ultrasonic cleaning or rotary tumbling, holds 1000.223 cases, or 2000 9mm cases.

Lee loader.243 winchester

FEATURES
-Complete reloading system for.243 Winchester
-Does not include rubber mallet

Mec powder bushing #12a

FEATURES
-View MEC's Powder Bushing Chart & Charge Bar Selection information:
https://www.mecshootingsports.com/Images/document/PowderBushingChart.pdf

Lee shell plate #5l for load-master

FEATURES
-#5L quick change shell plate
-For Load-Master Press
-For .270 Winchester Short Magnum, .303 British, .30-40 Krag, .300 Magnum & similar

Lee x-press shellholder #21
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 6.8 spc, and 224 valkyrie

Egw ammo chamber checker 9mm 50 hole

FEATURES
-Uses the actual Clymer reamers that are used to chamber barrels
-Anodized matte black for durability
-Measures min case diameter
-Measures max overall length

Other Features: Aircraft aluminum,made in usa, anodized matte black

Lee trimmer gauge.38-55 winchester

FEATURES
-For .38-55 Winchester
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Rcbs chamber case length gauge.300 win mag
Other Features: Designed to quickly check case length, diameter, and overall cartridge length of your handloaded ammo.

Lee quick trim die body.454 casull_

FEATURES
-Quick trim die for .454 Casull

Lee spline drive breech lock bushing 4 pack

Mec wad finger 20ga

FEATURES
-20 Gauge
-Funnels the was through the crimp & into the wad chamber of the casing
-Fits all older MEC reloaders produced before 1983

Lee collet 2-die set 7mm-08 remington

FEATURES
-7mm/08 Remington
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee factory crimp die only.300wsm_

FEATURES:
-Caliber: 300 Winchester Short Magnum
-Factory Crimp
-Threads: 7/8" - 14

Lee double cavity mold.277-135-rf w/handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Other Features: For gas checks

Rcbs fl die set 6.5 creedmoor gp-d

FEATURES
-Caliber: 6.5 Creedmoor
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated