Scope Mounts And Rings

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Thompson/Center Encore
-0 MOA
-Center Spread: 0.838"*
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.48" Mount
-Fits T/C Contender

FEATURES:
Ambidextrous
Finish: Matte Black Anodizing
Center Spread: 2.125"
Overall Length: 5.094"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

FEATURES:
Ambidextrous
Finish: Matte Black Anodizing
Hole 1 to 2: 1.3"
Hole 2 to 3: 1.0"
Overall Length: 5.094"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

FEATURES:
-Aluminum
-Matte black
-Fits:long action Ruger American
-Length: 7.064"
-Center spread: 3.538"
-Height: .4"
-Mounting hardware included

FEATURES
-Ruger 10-22 mount
-Picatinny-style base
-Silver-matte finish
-Domestic 6061 T6 Extruded Aluminum
-Silver Anodized
-Hex head screws & wrench provided
-Center spread: 2.57"
-Overall length: 4.645"

FEATURES:
-Ruger 10-22 Picatinny Rail Scope Mount
-Machined From: Solid 7075 T6 Aircraft Grade Aluminum
-Finish: Matte Black
-Mounting Hardware: Socket Head Torx® Screws & Wrench provided
-Center Spread: 3.805"
-Overall Length of Mount: 7.064"
-Will not fit the 10-22 Takedown

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Silver anodized finish
-For Ruger 10-22, 10-22 Takedown
-Lowered to allow for use of rear sight with mount mounted
-0 MOA
-Center Spread: 2.57"*
-Overall Length: 4.645"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Solid 7075 T6 Aircraft Grade Aluminum
-Matte Black
-5.8" Mount
-Fits Benelli Super Nova

FEATURES:
Ambidextrous
Finish: Matte Black Anodizing
Center Spread: 4.7"
Overall Length: 7.458"
Height: .575" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Mossberg 500 (Post-'97)
-Center Spread: 2.125"*
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Tikka T3 & Tikka T3 Lite rifles
-20 MOA
-Center Spread: 3.245"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES
-Made specifically for Tikka T3/Lite
-Picatinny-style base
-Silver Anodized finish
-Domestic 6061 T6 Extruded Aluminum
-Hex head screws & wrench provided
-Center spread: 3.245"
-Overall length: 7.458"

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Tikka T3 & Tikka T3 Lite rifles
-0 MOA
-Center Spread: 3.245"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning Lever Action Short Action BLR
-0 MOA
-Center Spread: 2.8"
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning BAR/BLR Long Action
-0 MOA
-Center Spread: 3.19"
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061 T6 Extruded aluminum
-Matte Black
-Picatinny Rail
-Fits Browning AB3 Short Action

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning AB3 Long Action
-0 MOA
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*Comes standard with a bevel on both sides, making it ambidextrous

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning A-Bolt Long Action
-20 MOA
-Center Spread: 3.86"*
-Overall Length: 7.064"
-Height: 0.4"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning A-Bolt Long Action
-0 MOA
-Center Spread: 3.86"*
-Overall Length: 7.064"
-Height: 0.4"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Browning A-Bolt Short Action
-0 MOA
-Center Spread: 3.125"*
-Overall Length: 6.276"
-Height: 0.4"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 52
-Also fits Kimber 82C, 82G, H&R 12, Winchester 75, Anschutz 64, & Remington 37
-20 MOA
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 52
-Also fits Kimber 82C, 82G, H&R 12, Winchester 75, Anschutz 64, & Remington 37
-0 MOA
-Overall Length: 5.882"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 WSM
-20 MOA
-Center Spread: 3.514"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver