Scope Mounts And Rings

Warne base maxima 2pc win xpr sa/la action matte

FEATURES
-Fits Winchester XPR Long Action with 8/40 Screws
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Winchester xpr long action and short action with 8-40 screws

Warne base maxima 2pc browning a-bolt 3 pierce action matte

FEATURES
-Fits Browning A-bolt 3 Pierce Actions (8-40 screws), Savage round receiver 8-40 screws
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Browning a-bolt 3 pierce actions (8-40 screws), savage round receiver (8-40 screws)

Warne base maxima extension base only.554" rem 700 matte

FEATURES
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque is
recommended

Fits:
-Remington 700, 783, Ruger American Centerfire, Savage Centerfire, Weatherby Vanguard, Howa 1500,
Winchester Model 70, Nosler M48

Other Features: Remington 700, 783, howa 1500, win mdl 70, weatherby vanguard, nosler m48, savage centerfire, ruger american centerfire this is an extension base used with the two piece base set for proper eye releif

Warne base maxima 2pc savage pre-2003 bolt flat rear matte

FEATURES
-Fits Savage Pre-2003 Bolt Action Flat Rear
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Savage pre-2003 bolt action with flat rear

Warne base maxima 2pc win 70 wssm matte

FEATURES
-Fits Winchester WSSM
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Winchester wssm model 70

Warne base maxima 2pc savage accu-trigger matte

FEATURES
-Fits Savage Accu-Trigger, Ruger American Centerfire, T/C Venture, Remington 783, Axis/Axis II/Edge
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Savage accu-trigger, axis/axis ii/edge, ruger american centerfire, tc venture, remington 783,

Warne base maxima 2pc win model 70 mag w/.330 rhs matte

FEATURES
-Fits Winchester Model 70 Magnumwith .330 Rear Hole Space
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Winchester post 64 model 70 magnum w/.330 rear hole space

Warne base maxima 2pc rem new model 7 matte

FEATURES
-Fits Remington New Model 7
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Remington new model7

Warne base maxima 2pc marlin/ henry levered matte

FEATURES
-Fits Marlin 336, 1895, 1894, 444, .30-30 H009, .30-30 H009B, .45-70 H010
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Marlin 336, 1895, 1894, henry h009, h009b, h010

Warne base maxima 2pc ruger 10/22 matte

FEATURES
-Fits Ruger 10/22 Maxima Bases
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Ruger 10/22

Warne base maxima 2pc browning bar matte

FEATURES
-Fits Browning BAR, BLR Lightweight, BPR Pump
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Browning bar, blr lightweight, bpr pump

Warne base maxima 2pc browning blr steel receiver matte

FEATURES
-Fits Browning BLR Steel Receiver
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Browning blr steel receiver

Warne base maxima 2pc ruger american rimfire matte

FEATURES
-Fits Ruger American Rimfire, MarlinXT-22 & XT-17
-Low profile design allows use of iron sights when optics are removed
-Full width & depth recoil slots provide maximum bearing surface for recoil key engagement
-Bases securely mount to your firearm with Torx-style T-15 socket cap screws, 25 in/lb. of torque
is recommended

Other Features: Ruger american rimfire, marlin xt-22, xt-17

Warne base tact rail remington 700 long action

FEATURES
-For Remington 700 Long Action
-Warne Tactical Rails allow the use of Picatinny or standard Weaver style rings
-Constructed of solid steel
-Cross slots feature the 1913 Mil-Spec design
-Bases securely mount to your gun with T-15 Torx style screws, 25 in/lb. of torque recommended

Other Features: Allows use of picatinny or weaver style rings

Warne base tact rail remington 700 long action 20moa

FEATURES
-For Remington 700 Long Action
-Warne Tactical Rails allow the use of Picatinny or standard Weaver style rings
-Constructed of solid steel with 20 MOA configuration
-Cross slots feature the 1913 Mil-Spec design
-Bases securely mount to your gun with T-15 Torx style screws, 25 in/lb. of torque recommended

Other Features: Allows use of picatinny or weaver style rings, 20 moa base

Warne x-skel mount 34mm 20moa picatinny black

FEATURES:
-Lightwweight, skeletonized aluminum body and caps
-#8 Torx style fasteners with steel threaded inserts
-Additional 1 Inch cantilever forward design to provide additional eye-relief
-Places your optic at the Ideal Height for MSR and similar platforms
-Dual 1/2" tactical nut attachment,
-65"/lb. of torque is recommended
-Ulra High ring height
-34mm
-Overall weight: 7.0oz

Other Features: 20 moa built in, extended design provides over 2 inches of forward cantilever for eye relief

Warne x-skel mount 30mm 20moa picatinny black

FEATURES:
-Lightweight, skeletonized aluminum body and caps to reduce overall weight
-#8 Torx style fasteners with steel threaded inserts to prevent stripping
-1" cantilever forward design to provide additional eye relief.
-Places your optic at the Ideal Height for MSR and similar platforms.
-Dual 1/2″ tactical nut attachment
-20 Minute Of Angle
-Size: 30mm
-Color: black

Other Features: 20 moa built in, extended design provides over 2 inches of forward cantilever for eye relief

Warne x-skel mount 30mm 20moa picatinny tactical gray

FEATURES
-30mm
-Tactical Gray
-20 MOA built-in for precision long range adjustments
-Lightweight, skeletonized aluminum body & caps to reduce overall weight without sacrificing reliability
-#8 Torx style fasteners with steel threaded inserts to prevent stripping
-Extended design provides over 2" of forward cantilever for additionaleye relief
-Places your optic at the ideal height for MSR & similar platforms
-Dual 1/2″ tactical nut attachment, 65 in/lb. of torque is recommended

Other Features: 20 moa built in, extended design provides over 2 inches of forward cantilever for eye relief

Warne x-skel mount 1" 20moa picatinny black

FEATURES:
-Lightweight, skeletonized aluminum body and caps to reduce overall weight
-#8 Torx style fasteners with steel threaded inserts to prevent stripping
-1" cantilever forward design to provide additional eye relief.
-Places your optic at the Ideal Height for MSR and similar platforms.
-Dual 1/2″ tactical nut attachment
-20 Minute Of Angle
-Size: 1"
-Color: black

Other Features: 20 moa built in, extended design provides over 2 inches of forward cantilever for eye relief

Warne picatinny side mount adapter 45 degree black

FEATURES
-45°
-Machined aluminum with matte black anodized finish
-Designed to co-witness with the side rails of the R.A.M.P. Mount to allow the use of pop-up or
fixed type combat/open sights.
-45° offset offers a mounting position for flashlights, lasers, slings or open sights without obstructing
your sight line
-Four Mil-Spec 1913 cross slots to accommodate most Picatinny style accessories

Warne picatinny side mount adapter 45 degree gray

Warne picatinny side mount adapter 45 degree fde

Warne base aluminum maxima 1pc ruger 10/22 10moa matte

FEATURES:
-For Ruger® 10/22
-10 Minute Of Angle
-Weaver style rings needed
-1 piece base
-Color: black matte

Other Features: 10moa, made in usa

Warne skyline precision data card label refills 50 pack
Other Features: Made in usa, works on both 30mm and 34mm skyline precision mounts

Warne skyline precision data card holder for precision mnts
Other Features: Made in usa, works on both 30mm and 34mm skyline precision mounts

Warne skyline precision level for skyline precision mounts

FEATURES:
Height:1.2"
Length:6.4"
Width: 4.6"
Works on both 30MM and 34MM Skyline mounts

Other Features: Made in usa, works on both 30mm and 34mm skyline precision mounts

Warne skyline precision 34mm 1pc cantilever mount matte

Warne skyline precision 34mm 1pc mount bolt rifle med hght

Warne skyline precision 30mm 1pc cantilever mount matte

Warne skyline precision 30mm 1pc cantilever mount 20moa

Warne skyline precision 30mm 1pc mount msr ideal height

Warne rail mountain tech savage axis/edge matte

FEATURES:
-ForSavage Axis & Edge
-Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform
-Mil-Spec hardcoat anodized finish for abrasion and corrosion resistance
-Bases feature black zinc coated hardware for “Element Proof” protection
-Self centering tapered T-15 Torx screws
-Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible

Other Features: Fits savage axis and edge, made in usa