Stocks And Forearms

Utg stock assembly ar-15 black a2 fixed complete assy.

FEATURES
-New Gen Model4 standard A2 butt stock assembly
-Stock molded from impact resistant advanced polymer
-Complete with A2 extension tube, recoil spring, buffer assembly, stock spacer, & screw
-Storage pocket for cleaning kit, small parts & other accessories

Other Features: Includes buffer, spring, buffer tube, stock spacer and screw.

Rival arms rifle stock rem 700 sa chassis system black andzd
Other Features: M-lok compatible, scalloped forened for a positive grip, designed for use with aics style magazines, tapped for sling swivel stud rits remington 700 barreled short actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory and aftermarket bbls 1.375in max

Rival arms rifle stock ruger 10/22 chassis system black
Other Features: Fits ruger 10/22 barreled actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory/aftermarket bbls 1" max diameter m-lok compatible rail system, scalloped forend for a positive grip, tapped for sling swivel stud, designed for ruger factory magazines

Ruger module high comb compact length of pull 12.50"

FEATURES:
-1.84" comb
-12.5" length of pull
-Intended for use with aftermarket scopes or mounted sights
-Ideal for shooters that prefer a shorter length of pull
-Fits any Ruger rifle with the Modular Stock System

Other Features: High comb 1.84" compact length pull 12.50"

Ruger module low comb compact length of pull 12.50"

FEATURES:
-1.26" comb
-12.5" length of pull
-Intended for use with standard iron sights
-Ideal for shooters that prefer a shorter length of pull
-Fits any Ruger rifle with the Modular Stock System

Other Features: Low comb 1.26" compact length pull 12.50"

Ruger module high comb standard length of pull 13.75"

FEATURES:
-1.84" comb
-13.75" length of pull
-Intended for use with aftermarket scopes or mounted sights
-Fits any Ruger rifle with the Modular Stock System

Other Features: High comb 1.84" standard lenght of pull 13.75"

Ruger module low comb standard length of pull 13.75"

FEATURES:
-1.26" comb
-13.75" length of pull
-Intended for use with standard iron sights
-Fits any Ruger rifle with the Modular Stock System

Other Features: Low comb 1.26" standard lenght of pull 13.75"

J&e pistol buffer tube combo kit black
Other Features: 6061 t6 aluminum padded pistol buffer tube,black 3oz buffer, castle nut,standard end plate, spring

J&e dpms platform mil-spec buffer tube kit
Other Features: Dpms 6061 t6 grade aluminum buffer tube,spring,black buffer,castle nut,standard end plate

J&e ar15/ar10 milspec 6-pos rec extension buffer tube blk
Other Features: Anodized

Odin stock zulu 2.0 w/padded buffer tube blue for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Maxim ccs stock ar15 gen6 black

FEATURES:
-Full length cheek weld
-Rapid deployment
-Aluminum Alloy housing
-Works on all AR15 platforms
-Length: 6.825-10.5"

Other Features: Does not include buffer or spring uses standard ar15 buffers and springs

Bcm stock mod 1 sopmod fde fits ar-15 mil-spec

FEATURES:
Material: Polymer
Finish: Flat Dark Earth
Size: For Mil-Spec tube
Snag free Design
Modular VBOST (Vehicle Borne Operations Sling Tab)
Longer overall length to fit longer "MilSpec" diameter AR10/A5/Intermediate receiver extensions
Storage compartment located in the toe of the stock, accessible through butt pad
Built in rubber butt pad for secure shoulder placement

Other Features: Storage compartment located in the toe of the stock.More pronounced sopmod cheekweld.Built in rubber butt pad for secure shoulder placement.

Bcm stock mod 0 sopmod fde fits ar-15 mil-spec

FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Flat Dark Earth
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad

Bcm stock mod 0 sopmod black fits ar-15 mil-spec

FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Black
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad

Mi stock tube with light weight stock picatinny
Other Features: For use with firearms that have a picatinny attachment, not for use with firearms with buffer assemblies, all nfa rules apply

Mi long rail handguard mount fits most std ar-15 handguards

FEATURES:
-Will fit AR series handguards with large or small holes
-Hard coat anodized 6061 aluminum construction
-In most circumstances you will be able to use standard heat shields after installation
-Mounting hardware included
-Approx. 4" long
*Will not fit Gen2 SS handguards

Other Features: Easy install no gunsmithing, will fit standard ar-15 handguards with small or large holes.Mounts to to or bottom of handguard only.Cheap alternative for a lightweight accy rail made in usa

Mb stock flex standard 13.5" lop med.Pad mo-bu infin

FEATURES:
-Mossy Oak Break-Up Infinity
-Standard synthetic stock
-Medium (13.5" length of pull)
-Standard recoil pad
-Fits 12 & 20 gauge FLEX System shotguns, & MVP FLEX & FLEX-22 rifles

Mb stock flex compact-youth 12.5" lop medium pad black syn

FEATURES:
-Black
-Standard synthetic stock
-Compact (12.5" length of pull)
-Standard recoil pad
-Fits 12 & 20 gauge FLEX System shotguns, & MVP FLEX & FLEX-22 rifles

Mb forend flex standard mo-infinity camo synthetic

FEATURES:
-Mossy Oak Break-Up Infinity
-Standard forend
-Fits 12 & 20 gauge FLEX System shotguns only

Mb forend flex standard black synthetic

FEATURES:
-Black
-Standard forend
-Fits 12 & 20 gauge FLEX System shotguns only

Adv.Tech.Ak fiberforce stock black matte

FEATURES
-Thumbhole Grip Rifle Stock
-Dragunov/Military style
-Built-in cheekrest
-Matching ventilated handguards
-Dowel sling mount
-Ambidextrous
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most stamped & milled AK receivers like the WASR, MAK-90, Maadi, etc.

*NOT compatible with the MAK-9

Other Features: Dowel sling mount fits most ak, mak-90 and maadi no gunsmithing simple drop-in installation handguard included handguard included made in usa will not fit siaga some romanian ak handguards may requir modification

Magpul stock prs3 ar15 rifle and mil-spec carbine fde

FEATURES
-Mounts to rifle-length, mil-spec carbine, or A5-length receiver extension tubes (not included)
-Enhanced strength butt-plate withstands severe impact & recoil up to .50 BMG
-Rubber butt-pad provides positive shoulder purchase to prevent slippage & is adjustable for both
cant & height
-Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
-Steel adjustment shafts finished with Melonite® for wear & corrosion resistance
-All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
-Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails
for use with a monopod
-Sling Mounts
-Front/Rear -Rotation-limited QD sling swivel mounts (swivels not included)
-Rear -1.25" aluminum sling loop (left-right reversible)

*Specifications based on factory configuration

Other Features: For ar15 or ar10/sr25, installs on rifle length receiver extensions or mil-spec and a5 length carbine receiver extensions

Magpul stock prs3 ar15 rifle and mil-spec carbine black

FEATURES
-Mounts to rifle-length, mil-spec carbine, or A5-length receiver extension tubes (not included)
-Enhanced strength butt-plate withstands severe impact & recoil up to .50 BMG
-Rubber butt-pad provides positive shoulder purchase to prevent slippage & is adjustable for both
cant & height
-Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
-Steel adjustment shafts finished with Melonite® for wear & corrosion resistance
-All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
-Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails
for use with a monopod
-Sling Mounts
-Front/Rear -Rotation-limited QD sling swivel mounts (swivels not included)
-Rear -1.25" aluminum sling loop (left-right reversible)

*Specifications based on factory configuration

Other Features: For ar15 or ar10/sr25, installs on rifle length receiver extensions or mil-spec and a5 length carbine receiver extensions

Magpul stock moe sl-s ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via hand-removable, o-ringed rubber plugs that
are waterproof to 10 meters
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle leaf spring minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-S will only fit the common mil-spec tube.

Other Features: Fits mil-spec buffer tubes, moe sl with storage (s)

Magpul stock moe sl-k ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.

Other Features: Fits mil-spec buffer tubes, compact buttstock

Magpul stock moe sl-k ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.

Other Features: Fits mil-spec buffer tubes, compact buttstock

Magpul stock moe ak47/74 stamped receivers fde

FEATURES
-Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion*
-Minimum weight & bulk with reinforced polymer A-frame construction
-Cheek weld combines a slim profile with user comfort
-Optional snap on AK Cheek Risers are available for use with optics
-Internal storage compartment optimized for factory AK cleaning kit
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Rear -Optional Sling Mounts Kits (TYPE 1 and TYPE 2) accept push-button QD swivels
-Rear - 1.5" fixed sling loop

*Note: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AK's or the Norinco Type 56S/MAK-90 due to differences in the trunnion’s tang. Also not compatible with traditional milled receiver rifles.

Magpul stock moe ak47/74 stamped receivers black

FEATURES
-Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion*
-Minimum weight & bulk with reinforced polymer A-frame construction
-Cheek weld combines a slim profile with user comfort
-Optional snap on AK Cheek Risers are available for use with optics
-Internal storage compartment optimized for factory AK cleaning kit
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Rear -Optional Sling Mounts Kits (TYPE 1 and TYPE 2) accept push-button QD swivels
-Rear - 1.5" fixed sling loop

*Note: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AK's or the Norinco Type 56S/MAK-90 due to differences in the trunnion’s tang. Also not compatible with traditional milled receiver rifles.

Magpul stock folding zhukov-s ak47/74 stamped receivers blk

FEATURES
-Mounts to most stamped receiver AK-47/AKM/AK-74 pattern rifles with fixed stock, single tang trunnion*
-5-Position length of pull adjustability and solid "fixed stock" lockup with consistent cheek weld in all
positions
-Adjustment lever is unobtrusive and anti-snag
-High strength, wear compensating lock mechanism allows stock to fold to the right
-Solid steel hinge pin
-Positive detents in the stowed position prevents movement while still allowing the stock to be instantly
deployed
-Weapon may be charged and fired while stock is folded (without Cheek Risers installed)
-Cheek weld combines a slim profile with user comfort and optional snap on AK Cheek Risers are available
for use with optics
-Rubber butt-pad offers an anti-slip surface and increases impact protection
-Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
-Sling Mounts
-Front - Left-side rotation limited sling mount accepts push-button QD swivels for one-point sling usage
(swivel not included)
-Rear -Optional Sling Mounts Kits (TYPE 1 and TYPE 2) accept push-button QD swivels
-Rear - 1.5" sling loop

*Note: Due to the wide range of tolerances of your typical AK, minor fitting of the stock may be required. Not compatible with Yugo pattern AK's or the Norinco Type 56S/MAK-90 due to differences in the trunnion’s tang. Also not compatible with traditional milled receiver rifles.

Other Features: Collapsible and folding stock

Magpul stock hunter x-22 for ruger 10/22 gray

FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops

Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad

Magpul stock hunter x-22 for ruger 10/22 fde

FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops

Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad