Stocks And Forearms

Magpul stock hunter x-22 for ruger 10/22 black

FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops

Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad

Magpul forend moe m-lok rem 870 12ga fde

FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

Note: Not compatible with the Remington 870 Super Mag.

Magpul forend moe m-lok rem 870 12ga black

FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

Note: Not compatible with the Remington 870 Super Mag.

Magpul stock hunter 700 for short action rem 700 odg

FEATURES
-Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
-Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable
Magpul Bolt Action Magazine Well
-Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding
block
-Accepts ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia.
5.50" forward of the breech)
-Tapered Beam design provides good rigidity through forend & will free-float compatible barrels
-60° grip angle from bore axis
-Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
-Rubber recoil butt-pad included & optional OEM Butt-Pad Adapter available for use with aftermarket pads
-Accepts factory & most aftermarket triggers
-M-LOK slots on forend sides & bottom for a wide variety of accessory and sling mounting options
-Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops

*Note: Fits right-hand receivers only.
All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well.
Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700.

Other Features: Fits remington 700 with short action, cast aluminum bedding block, drop-in, m-lok compatible

Magpul forend moe m-lok mossberg 590/590a1 fde

FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.

Magpul forend moe m-lok mossberg 590/590a1 black

FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.

Magpul stock sga mossberg 12ga fixed fde fits 500/590/590a1

FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Mossberg 500/590/590A1 12 ga. series shotguns
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad

Magpul stock sga mossberg 12ga fixed black fits 500/590/590a1

FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Mossberg 500/590/590A1 12 ga. series shotguns
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad

Magpul stock ubr gen2 ar15 carbine fde

FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)

*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.

**Specifications based on factory configuration

Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.

Magpul stock ubr gen2 ar15 carbine black

FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)

*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.

**Specifications based on factory configuration

Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.

Magpul stock moe fixed ar15 carbine mil-spec tube black

FEATURES:
-Fixed Length
-Integrated 1.25" sling loops
-Durable polymer construction
-Mil-Spec
-Weight: 9.5 oz
-Black

Other Features: Fits mil-spec buffer tubes, fixed model

Magpul stock str ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG470

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits commercial buffer tubes

Magpul stock str ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG471

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits mil-spec buffer tubes

Magpul stock sga rem 870 12ga fixed fde

FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad

Magpul stock sga rem 870 12ga fixed black

FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad

Magpul stock moe ar15 rifle fixed fde

FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels

Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).

*Specifications based on factory configuration

Other Features: Direct replacement for fixed a1 or a2 buttstock.

Magpul stock moe ar15 rifle fixed black

FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels

Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).

*Specifications based on factory configuration

Other Features: Direct replacement for fixed a1 or a2 buttstock.

Magpul stock moe ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" ExtendedRubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG400

Other Features: Fits commercial buffer tubes

Magpul stock moe ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401

Other Features: Fits mil-spec buffer tubes

Magpul stock moe ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401

Other Features: Fits mil-spec buffer tubes

Magpul stock acs-l ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG379

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits mil-spec buffer tubes lightweight model

Magpul stock acs ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG370

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec receiver extension & may vary depending on tube manufacturer.

Other Features: Fits commercial buffer tubes

Magpul stock acs ar15 carbine mil-spec tube fde!

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits mil-spec buffer tubes

Magpul stock acs ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits mil-spec buffer tubes

Magpul stock moe sl ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG347

Other Features: Fits commercial buffer tubes

Magpul stock moe sl ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348

Other Features: Fits mil-spec buffer tubes

Magpul stock moe sl ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348

Other Features: Fits mil-spec buffer tubes

Magpul stock ctr ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, Olympic, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG310

Other Features: Fits commercial buffer tubes

Magpul stock ctr ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311

Other Features: Fits mil-spec buffer tubes

Magpul stock ctr ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311

Other Features: Fits mil-spec buffer tubes

Adv.Tech.Stock for mosin nagant sporter style black syn

FEATURES
-Monte Carlo Rifle Stock with Checkered Forearm & Grip
-Easy drop-in installation
-Constructed of DuPont® extreme reinforced polymer
-Scorpion recoil pad
-Raised cheekrest
-Two sling swivel studs

Fits:
-Most 91/30 rifles & M-38, M-44 carbines & Mosin Nagant variants 7.62x54R

Note: Will NOT fit firearms with a hex receiver, some minor modification may be required

Other Features: Fits all models of mosin nagant rifles and carbines no gunsmithing length of pull 13.5" rubber butt pad and studs

Kriss vector folding stock kit fits carbines gen1/2 w/hinge

FEATURES:
-Matte Black
-Factory original part
-Compatible with both Gen 1/Gen 2 KRISS Vector bodies
-Aids with storage/transport

Other Features: Will not fit pistols