Tactical Rails And Accessories

Bcm vertical grip mod 3 black fits keymod rails

FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Black
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.

Mountain tactical tikka tac a1 arca rail mlok hookup black
Other Features: Tikka tac a1 arca rail

Troy battle rail covers 4.4" black 3-pk

FEATURES
-Black
-4.4"
-3 pack
-Easily slides onto a Mil-Std Picatinny rail
-Locks into place with a built-in retaining clip
-Can be adjusted with a bullet tip
-No tools required
-Constructed from durable, heat & chemical-resistant synthetic polymer resin
-Proven to reduce heat transfer & hand abrasions

Other Features: Engineered to survive the most extreme conditions fits all picatinny rails to create a more comfortable grip made in usa

Troy squid grip fde 7-pk fits select troy rails

FEATURES
-Flat Dark Earth
-7 pack
-For the Alpha, Delta, TRX Extreme rails & the T22 Sport Chassis
-Made of proprietary advanced rubber
-Heat resistant
-Extremely durable
-Inserts directly into the cooling holes
-May be cut to form any length or inserted end to end for longer lengths
*Will not fit the Troy/VTAC rail systems

Other Features: Revolutionary rail cover fits trx extreme/alpha/delta troy rails made in usa

Troy squid grip black 7-pk fits select troy rails

FEATURES
-Black
-7 pack
-For the Alpha, Delta, TRX Extreme rails & the T22 Sport Chassis
-Made of proprietary advanced rubber
-Heat resistant
-Extremely durable
-Inserts directly into the cooling holes
-May be cut to form any length or inserted end to end for longer lengths
*Will not fit the Troy/VTAC rail systems

Other Features: Revolutionary rail cover fits trx extreme/alpha/delta troy rails made in usa

Troy cqb vertical grip black fits picatinny rails

FEATURES
-Black
-Made from Troy proprietary military-grade, chemical, biological & impact resistant polymer
-Attaches to any Mil-Std rail without tools
-Will not heat up during rapid fire or full auto fire
-Waterproof storage compartment
-Aggressive ridged pattern for an enhanced grip

Other Features: Waterproof storage compartment aggressive ridged pattern for enhanced grip made in usa

Troy rail sling mount black fits troy alpha rails<

FEATURES
-Matte black finish
-Low profile, lightweight & durable
-Includes S.S.Q.D. swivel
-For Alpha, Alpha .308 TRX Extreme, TRX .308 Rails, & T-22 Sport Chassis
*Not compatible with the Alpha Revolution Rail

Other Features: Troy q.D.Swivel w/trx cooling hole low-pro mount fits in cooling holes in trx extreme and alpha rails made in the usa

Troy rail section 4.2" black quick-attach w/qd swivel hole

FEATURES
-Black
-4.2"
-Secures with two screws to a backer on the inside of certain Troy rails
-For use on Alpha, Delta, TRX 308, TRX Extreme, Troy HK rails, & T-22 Sport Chassis, M7 uppers & M7 kit
-Accommodates a full range of accessories
-Installs them solidly onto the rail

Other Features: Fits troy modular rails qd swivel hole in rail does not include qd swivel made in usa

Troy rail section 2" black quick-attach

FEATURES
-Black
-2"
-Secures with two screws to a backer on the inside of certain Troy rails
-For use on Alpha, Delta, TRX 308, TRX Extreme, Troy HK rails, & T-22 Sport Chassis, M7 uppers & M7 kit
-Accommodates a full range of accessories
-Installs them solidly onto the rail

Other Features: Fits troy modular rails made in usa

Troy ssqd swivel black

FEATURES
-Black finish
-Detachable
-Versatile, durable, heavy-duty stainless
-Raised cup around the push button to prevent accidental release

Adv.Tech.Heatshield standard shotguns black steel

FEATURES
-Steel Formed Shotgun Heatshield
-Elongated Cooling Slots for Maximum Dissipation of Heat
-Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
-13-1/2" Long
-Manufactured in the USA

Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns.

Note:Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith.

Other Features: Easily adapts to fit most 12ga 16ga, 20ga, &.410 shotguns slide over barrel and secure w/included screws heatshields should not be used on mossberg mariner or remington marine coat shotguns

Adv.Tech.Forend standard for most 12ga.Pumps black syn

FEATURES
-No jamming!
-Designed not to overlap the shotgun's receiver when cycling the pump action
-Easy removal and installation
-DuPont® extreme temperature glass reinforced polymer
-Manufactured in the USA

Other Features: Designed not to overlap the shotguns reciever when cycling fits: 12ga.Mossberg 500/590 remington 870, winchester 1200 norinco 98; adapters included

Adv.Tech.Heatshield deluxe shotforce w/sights black syn

FEATURES
-Steel Formed Shotgun Heatshield
-Elongated Cooling Slots for Maximum Dissipation of Heat
-Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
-AR-15 Style Fixed Nylon Ghost Ring Sights
-13-1/2" Long
-Manufactured in the USA

Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns

Note:Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith.

Other Features: Deluxe heatshield with ghost ring sights no gunsmithing

Sharps bros.Handguard 15" ultralite m-lok for ar-15

FEATURES:
-15" Ultra Lite MLOK Handguard
-Made of 6061-T6 aluminum & anodized black
-Weighs 9.8 oz

Sharps bros.Handguard 10" ultralite m-lok for ar-15

FEATURES:
-10" Ultra Lite MLOK Handguard
-Made of 6061-T6 aluminum & anodized black
-Weighs 6.9 oz

Sharps bros.Handguard 7" ultralite m-lok for ar-15

FEATURES:
-7" Ultra Lite MLOK Handguard
-Made of 6061-T6 aluminum & anodized black
-Weighs 5.4 oz

Sharps bros.Handguard 13.7" ultralite m-lok for ar-15

FEATURES:
-13.7" Ultra Lite MLOK Handguard
-Made of 6061-T6 aluminum & anodized black
-Weighs 9.1 oz

Sako tactical rail trg 22/42 225mm x 21mm phosphate

Bcm qd sling swivel mount picatinny w/o qd swivel

FEATURES
-Fits standard 1913 Picatinny rail interface
-Accepts standard QD push button sling swivels
-Non-rotational locking interface
-Requires two lugs & one 1913 slot to mount properly
-All steel construction
-Includes hex wrench

Other Features: Fits standard 1913 picatinny rails, accepts qd sling swivels (not included), non-rotational interface

Utg vertical foregrip folding picatinny mount black

FEATURES
-5.6"
-Black
-5 adjustable foregrip positions
-Ergonomic finger grooves for most comfortable grip
-Clever end cap conceals battery storage & controls grip mounting
-Practical side slides allow for ambi use of pressure pad
-Simple slide-on mounting deck for most solid installation

Other Features: Battery storage, removable side slides for pressure pad install.

Rival arms pic rail 7-slot m-lock quick detach black
Other Features: 7-slot pic rail, black, quick detach

Rival arms pic rail 15-slot m-lock black
Other Features: 15-slot pic rail, black

Rival arms pic rail 9-slot m-lock black
Other Features: 9-slot pic rail, black

Rival arms pic rail 5-slot m-lock black
Other Features: 5-slot pic rail, black

Rise handguard slimline 11.5" picatinny black ar-15

FEATURES:
Length: 11.5"
Inside Diameter: 1.35"
Weight: 10.5 oz
Picatinny upper rail system
Integrated sling swivel mounting points
Precision CNC machined from 6061-T6 billet aluminum

Ruger mark iii & iv 22/45 picatinny rail

FEATURES:
-Factory 1913 style picatinny rail for Mark IV™, Mark III™ & 22/45™
-Rail fits firearms w/ factory pre-drilled receivers
-Includes three screws
-DOES NOT FIT MARK I & MARK II PISTOLS

Ruger short action handguard<

FEATURES:
-Provides improved clearance for larger long range scopes
-Wider keymod flat at the 6:00 position provides a stable foundation for mounting bipods
-Installs quickly & easily w/ basic hand tools
-Includes handguard & mounting hardware
-Designed to fit the Ruger Precision Rifle

J&e polymer mlok rail 4" 7-slot 2pk
Other Features: Fits all m-lok handguards

J&e polymer keymod rail 4" 7-slot 2pk
Other Features: Fits all key-mod handguards

Kel-tec compact forearm for plr16 pistol synthetic black

FEATURES
-For the Kel-Tec PLR-16 Pistol
-Complete with Picatinny rail
-Allows the pistol to be held comfortably & safely

Other Features: For pistols only includes all needed hardware

Bcm rail pkmr mid-length keymod fde polymer fits ar15

FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Flat Dark Earth

Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base

Bcm rail pkmr mid-length keymod black polymer fits ar15

FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Black

Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base