Tactical Rails And Accessories

Bcm rail section--nylon keymod 5.5" rail fde

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Audere nato rail tikka t3/t3x 30 moa black

Audere nato rail tikka t3/t3x 20 moa black

Audere nato rail tikka t3/t3x 0 moa black

Utg rail picatinny sw m&p10 2-pc drop-in mid-length

FEATURES
-8.7"L x 2.4"W x 2.47"H
-Proudly designed & made in the USA
-2 piece drop-in fits round front cap .308 & certified on Smith & Wesson M&P10
-Precision machined from aircraft aluminum with black anodizing
-Solid locking features for most secure fit
-4 Mil-Spec Picatinny rails, each with 19 slots for versatile accessory applications
-Simple & friendly installation - no gunsmith
-16 pieces rubber rail guards included

Other Features: Certified for the s&w m&p10, no gunsmithing required, 2 piece drop in, 9" rail, includes rail covers, made in usa

Iron city handguard berserker lite 15.25" m-lok black

FEATURES:
-6063 Extruded Aluminum
-M-Lok rail
-1913 Picatinny
-Black Nitride finish

Magpul rail section 3 slot m-lok handguards polymer

FEATURES
-3 slots, max overall length of 1.6"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

Other Features: Fits all m-lok handguards

Mi handguard 308 combat rail 12.625" dpms high mlok sr25
Other Features: Dpms high compatible, for receivers with.210" tang height

J&e stinger picatinny rail cover black 20pk

FEATURES:
Fits Picatinny and Weaver style rails
Covers snap easily into place over exposed sections of rail
Lightweight Polymer
Durable weather and temperature resistant

Other Features: Fits picatinny and weaver style rails 20 per pkg

Aimshot quick release m-lok adapter w/picatinny rail 40mm

FEATURES:
Length: 6.75
Width: 4.9
Height: 1.55
Solid aluminum housing coupled with steel fasteners
Simple push button technology

Aimshot quick release keymod adapter picatinny rail

FEATURES:
-Utilizing 2 alignment pins & a locking cylinder these mounts are designed for the abuse
-Attaches & releases to the rail w/ 2 simple quick release buttons, allowing for easy on/off w/out sacrificing
mount retention

Aimshot quick release keymod bipod adapter

FEATURES:
Height: 1.15
Length: 6.75
Width: 4.9
Attaches with a snap
Fits most traditional style bipods

Other Features: Attaches with a snap, fits most traditional style bipods

Aimshot quick release keymod adapter picatinny rail 140mm

FEATURES:
Height: 1.8
Length: 8.0
Width: 6.1
Unlock with two button press
No tools required
Balck aodized 6061 T6 Balck anodized aluminum

Other Features: Press & slide to securely connect.Aluminum housing.

Ab arms pro aluminum free float handguard m-lok 13" blk
Other Features: 6061 t6 aluminum,hard coat anodized mil-aa8625 type iii class ii,1.5" overall width, 1.3" i.D.,integrated qd mount, 2" barrel nut anti rotation ears that are integral to mil-spec 1913 picatinny rail for clean fit w/forged or billet uppers,all hardware included

Magpul rail section 5 slot m-lok handguards polymer

FEATURES
-5 slots, max overall length of 2.5"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

Other Features: Fits all m-lok handguards

Mi handguard 308 combat rail 15" dpms high mlok sr25
Other Features: Dpms high compatible, for receivers with.210" tang height

Mi handguard grm m-lok g4 15" fits ar-15
Other Features: 1 piece free float handguard, 5 slot m-lok rail included

Aimshot qr rail adapter qr 60 mm picatinny rail 14mm riser

FEATURES
-Allows you to quickly remove or attach items to picatinny rail
-Ideal for shorter optics/red dot sights that ou want to raise to co-witness lower in the window

Other Features: Length:60mm height:14mm

Utg vertical foregrip 4.7" folding qd picatinny aluminum

FEATURES
-4.7"
-Unique knurled surface for most solid grip
-Smart posi-lock cross bolt & spring tensioned locking plate with steel insert
-Fully adjustable quick detachable lever to fit on any Picatinny/Weaver rail
-Smart end cap with water proof O-ring for 1 AA battery storage
-Precision machined from aircraft-grade aluminum alloy
-Fold & lock in 2 positions with spring tensioned posi-lock mechanism

Other Features: Battery storage, qd picatinny mount, folding

Utg ar-15 micro gas block.750" steel matte black

FEATURES:
-Fits .750" barrels
-Durable steel construction
-Corrosion resistant finish
-Low-profile design fits under free float handguard
-Secures w/ serrated self-locking set screws

Other Features: Ar-15 micro gas block,.750" inner diameter, weight:1.5 oz

Motac m-lok slot cover 3 slot 5 pack fits all m-lok rails

Bcm rail section--nylon keymod 4" rail fde

FEATURES
-KeyMod Picatinny Nylon Rail Section
-4"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Phase 5 handguard lo-pro slope nose 15" for ar-15 black

FEATURES:
-Developed to accommodate the features of our 7.5" LPSN quad rail to a longer 15" version
-Slender design, longer nose, ease of installation & superior construction
-The LPSN™ undergoes a rigorous extra de-burring process in order to ensure a smoother snag free finish
-Built-in QD mounts w/ internal stops

Mi handguard 308 combat rail 12.625" dpms low mlok sr25
Other Features: Dpms low compatible, for receivers with.150" tang height

Mi handguard marlin 1895/1894/ 336 m-lok black

FEATURES:
Length: 13.625"
Width: 1.64"
Designed for Marlin 1895/1894 Rifles with handguard cap
one 5 slot M-Lok rail section
Forward mounted sling swivel
Slim light weight design
Constructed from 6061 aluminum, hard coat anodized
Weight: 6 oz
Made in USA

Other Features: Will not fit a rifle with a forward barrel band, must have a forward handguard cap.Fits the following with a forward handguard cap, marlin 1895 (not cb model), marlin 1894 (not cb model), marlin 336

Mi handguard sp series 10" m-lok ar-15 suppressor comp.

FEATURES:
Inside diameter 1.75"
Outside diameter 2.0"
1.95" over mounting flats
High quality MIL-STD 1913 top rail
One five slot Magpul M-LOK polymer rail section included
Construction from 6061 aluminum, hard coat anodized
Barrel nut and barrel nut wrench included
Weight: 11.2 oz
Made in USA

Mi handguard slh 9.25" m-lok fits ar-15

FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 9.25"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight: 8 oz
Made in USA

Mi handguard slh 15" m-lok fits ar-15

FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 15"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight:11.4 oz
Made in USA

Mi handguard slh 14" m-lok fits ar-15

FEATURES:
Inside diameter 1.3"
Outside diameter 1.5"
Overall length: 14"
6061 Aluminum Type 3 Hard Coat Anodized
Continuous MIL-STD 1913 Picatinny Top rail
Two Integral Anti-Rotation QD Sling Sockets
Barrel nut and barrel nut wrench included
Weight:10.8 oz
Made in USA

Bcm rail section--nylon keymod 5.5" rail black

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Ergo grip rail cover wedge lok keymod od green 4pk

FEATURES
-OD Green
-4-pack
-7-Slot KeyMod WedgeLok™ Slot Cover
-Compatible with #4238 Mossberg Shotgun KeyMod Forend

Other Features: Fits keymod rails, seven slot, made in usa

Magpul hand guard moe ak ak47/74 fde

FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & long side extensions shields hand from hot barrel while providing increased gripping surface
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod

*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap without sling loop. However, for those weapons with a retaining cap sling loop the MOE AK Hand Guard may be utilized if the loop is removed.

**Specifications based on factory configuration.

Other Features: Fits standard ak rifles without a front sling loop on the hand guard retainer.